888-MARK-TEN
 

help desk software


 
Case Study: Consumer Products
 
Measuring Stapler Actuation Force

Background:
The average consumer pays relatively little attention to the actuation force of a stapler, as long as it operates properly. To avoid situations in which actuation is too difficult or too sensitive for the consumer, a stapler manufacturer tasked Mark-10 with developing a testing solution.

How Mark-10 Helped:
Although relatively straightforward upon first glance, effectively measuring this force required special fixtures. Because a stapler uses a hinge, the actuation path is arc-shaped. Accordingly, Mark-10's engineers and machinists designed and produced a custom fixture with an arm and pivot design. The force gauge pivots about the hinge, reflecting the actuation path. Multiple nest sizes were provided, to accommodate a variety of stapler footprints.

A motorized test stand produces a consistent rate of speed, so that multiple tests can be compared using the same test parameters. The lower limit switch is positioned to prevent over-travel and over-load. A force gauge captures the peak force and outputs data to a PC for further analysis. Several such testers are used in plants around the globe.

 
Products used:

 

Force Gauges  |  Torque Gauges  |  Sensors & Indicators  |  Test Stands  |  Systems & Kits  |  Grips & Attachments  |  Accessories  |  Software
Applications Gallery  |  Product Literature  |  
About Mark-10  |  Contact Us  |  Terms of Use