Page 35 - Catalog-21
P. 35

Test Stands

ESM303 - Optional Functions

Any of the below option packages may be purchased at time of order or may be enabled in the field at a later date though a simple
activation process. A complete options package is also available, including all of the below features at a discounted price. The
stands are shipped in Demo Mode, during which time all available features are enabled for 160 hours of operation.

          Feature        Part No.  Description                                                                                Requirements
FollowMeTM              AF008
                        AF009      Crosshead movement responds to manually pushing or pulling on the force gauge              - Series 7 or 5 gauge or indicator
Travel indication                  shaft or load cell. Increasing force produces greater speeds. Ideal for setups and quick   - 09-1214 interface cable
                        AF010      positioning.
Computer control        AF011                                                                                                 - Field hardware installation required.
Programmable travel     AF012      Travel is indicated on the control unit display, with output via USB. An internal scale    - If data output to a PC is required, add 09-1214 and 09-1158
limits                             utilizing Renishaw technology produces significantly higher accuracy than with
Overload                AF013      conventional rotary encoder-based designs. Backlash and nonlinearity are virtually          cables, and a Series 7 or 5 gauge or indicator.
protection                         eliminated. The most recent position is memorized between power cycles.
                        AF014                                                                                                 - Series 7 or 5 gauge or indicator
Auto return             AF016      The ESM303 may be fully controlled by a PC through a custom-written program in any         - AF009 travel indication
                        AF017      language supporting ASCII communications. Also responds to the legacy Chatillon            - AF011 programmable travel set points
Cycling / dwell time    AF018      TCD command set and legacy Nexygen TCD software (not available from Mark-10).              - 09-1214 interface cable
Independent up and      AF019                                                                                                 - 09-1158 USB output cable
down speeds             AF020
Low speed range                    The stand stops at or cycles between programmable upper and lower travel distances. - AF009 travel indication option
extension               AF021
High speed range        AF022      Protects a force gauge or force sensor against overload. Program the desired percent-      - Series 7 or 5 gauge or indicator
extension               AFCOMP     age of full scale of the gauge. Adjustable analog output voltage setting allows the        - 09-1214 interface cable
Break detection                    stand to interface with virtually any gauge with analog output.
Load holding                                                                                                                  - If reversing at force set point: Series 7 or 5 gauge or indica-
                                   The crosshead moves to a limit switch, force set point, travel position, or break, then     tor and 09-1214 interface cable
Preload / sample                   stops and reverses direction at full speed to the opposite limit.
touch                                                                                                                         - If reversing at travel limit: AF011 programmable travel limits
Profiles                           Same as auto return, but with the ability to program up to 100,000 cycles. Program-         option
Complete options                   mable dwell time for upper and lower limits (set independently) can be set up for up
package                            to 10,000 seconds.                                                                         - If reversing at break: AF019 break detection option and
                                                                                                                               09-1214 interface cable

                                                                                                                              - Same as auto return, at the same speed in each direction.
                                                                                                                               Add AF016 for independent up and down speeds.

                                   Individually configure speeds for the up and down directions.                              ---

                                   Extends the standard speed range down to                                                   ---
                                   0.02 in/min (0.5 mm/min).

                                   Extends the standard speed range up to                                                     ---
                                   45 in/min (1,100 mm/min).

                                   Crosshead stops at a sudden drop in force.                                                 - Series 7 or 5 gauge or indicator
                                   Programmable percentage of peak force.                                                     - 09-1214 interface cable

                                   Dynamically adjusts the crosshead position to maintain a programmed load for an            - Series 7 or 5 gauge or indicator
                                   indefinite or specified period of time.                                                    - If a specified time is required, add AF014 cycling / dwell

                                                                                                                               time option
                                                                                                                              - 09-1214 interface cable

                                   Stops the crosshead and/or zeroes the travel display at an initial preload - useful in     - AF009 travel indication
                                   tensile, compression, spring, elongation, and other applications. Preload is program-      - Series 7 or 5 gauge or indicator
                                   mable as a percentage of force gauge/load cell full scale. Three modes: (1) stop, (2)      - 09-1214 interface cable
                                   stop and zero, and (3) zero without stopping.

                                   Save and recall sets of test parameters, such as speeds, travel limits, preloads, etc. Up  ---
                                   to 50 profiles may be stored.

                                   Includes all funtions listed above, plus 09-1214 interface cable and 09-1158 USB cable.
                                                                Requires a Series 7 or 5 gauge or indicator.

Ordering Information*

ESM303                  Motorized test stand,110V**                                               * Controller options part numbers indicated in the table above.
09-1214                 Interface cable, gauge / indicator to ESM303                              ** E SM303 contains a universal power supply (80 - 240V) and
09-1158                 USB output cable
AC1062                  Load cell / indicator mounting kit                                           includes a power cord with US plug. Add suffix ‘E’ for Euro plug, ‘U’
ESM303-001-1 / -2 / -3  Single column extension, 6 / 12 / 24 in. [150 / 300 / 600 mm]                for UK plug, or ‘A’ for Australian plug. Ex: ESM303E
ESM303-002-1 / -2 / -3  Double column extension, 6 / 12 / 24 in. [150 / 300 / 600 mm]
   30   31   32   33   34   35   36   37   38   39   40