MARK-10: The force gauge and torque gauge sourceMARK-10 force gauges, torque gauges, and testing systems
MARK-10: A leader in force measurement and torque measurement testing systemsIdentify a MARK-10 force gauge or torque gauge for your force measurement and torque measurement requirements
We make a measurable difference in force & torque measurement USA Flag888-MARK-TEN

advanced FORCE GAUGES SERIES EG

The Series EG is an ideal solution for compression and tension applications requiring accuracy and flexibility in the entire 0.12 lb to 500 lb range. Features include selectable units of measurement, automatic peak memory, simple pushbutton calibration, programmable automatic shutoff, initial status of units and mode of operation, permanent configuration memory, and optional outputs (RS-232, Mitutoyo, and analog). Reversible aluminum housing allows for hand-held use or test stand mounting.

Use MESURgauge Software to tabulate, graph, and analyze test data  (requires EGRS data outputs package) - more info

 
Series EG Force Gauge
Data Sheet
User's Guide
Comparison Chart
  • Compatible with all Mark-10 test stands and grips
  • Selectable units of measurement
  • Programmable default configuration
  • Peak memory for tensile and compressive forces
  • Push-button calibration
  • Battery or AC operation
  • Programmable automatic shutoff
  • Permanent configuration memory
  • Optional RS-232, Mitutoyo and analog outputs
  • Reversible aluminum housing for handheld use or test stand mounting (see below)
  • Same housing size for all capacities

  • Accuracy: ± 0.3% of full scale ±1 digit
  • Sampling rate: 30 readings/sec
  • Safe overload: 150% of capacity
  • Battery life: 8-10 hours per charge
  • Weight: 0.9 lbs (0.4 kg)
  • Environmental requirements: 40°F - 100°F [5°C - 45°C], <96% humidity (non-condensating)
  • Warranty: 3 years
  • CE mark

Reversible Housing - A Mark-10 Exclusive

All Mark-10 force gauges have reversible housings that allow the user to use the gauge with the load cell shaft pointing up or down, without the inconvenience of upside-down buttons and display. The housing for Series BG and Series EG gauges is reversible by separating the two halves and reassembling them with just one connector - an extra bit of engineering that will make your testing setups quicker and more efficient.

>> Force / torque gauge comparison chart

OPTIONAL EQUIPMENT
  • A wide range of test stands and gripping fixtures
  • Outputs package
    RS-232, Mitutoyo, and analog outputs. Available at time of purchase or as an upgrade.
  • >> MESURgauge Software - tabulates and plots load vs. time or load vs. travel. Also calculates statistics, exports to Excel, and more. Requires EGRS data outputs package.
  • Output cables
    Send test data to a PC, statistical printer, or other data collector for further analysis. Requires outputs package.
  • Overload protection module
    Protects the force gauge against overloads during motorized tests, adjustable from 20 - 110% of gauge's full capacity. For use with Mark-10 motorized test stands. Requires outputs package.

<< The EG is compatible with all Mark-10 force measurement test stands. It is shown here in a compression testing application, mounted to an ES30 with optional items: digital travel display and extension rod.
>> Series EG force gauges are supplied in a cushioned carrying case with AC adapter, rechargeable battery, hook, flat, user's manual, and NIST-traceable certificate of calibration.

Included Accessories
Model Capacity x Resolution Hook Coupling Flat US Price
EG012 0.12 x 0.0001 lb, 50 x 0.05 gF, 0.5 x 0.0005 N, 110V G1028 - G1035 $795.00
EG025 0.25 x 0.0002 lb, 100 x 0.1 gF, 1 x 0.001 N, 110V $795.00
EG05 0.5 x 0.0005 lb, 250 x 0.2 gF, 2.5 x 0.002 N, 110V $795.00
EG2 2 x 0.002 lb, 1 x 0.001 kgF, 10 x 0.01 N, 110V $695.00
EG5 5 x 0.005 lb, 2.5 x 0.002 kgF, 25 x 0.02 N, 110V $695.00
EG10 10 x 0.01 lb, 5 x 0.005 kgF, 50 x 0.05 N, 110V $695.00
EG20 20 x 0.02 lb, 10 x 0.01 kgF, 100 x 0.1 N, 110V $695.00
EG50 50 x 0.05 lb, 25 x 0.02 kgF, 250 x 0.2 N, 110V G1038 G1039 $695.00
EG100 100 x 0.1 lb, 50 x 0.05 kgF, 500 x 0.5 N, 110V $695.00
EG200 200 x 0.2 lb, 100 x 0.1 kgF, 1000 x 1 N, 110V $795.00
EG500 500 x 0.5 lb, 250 x 0.2 kgF, 2500 x 2 N, 110V G1035 G1037 G1036 $795.00

Optional Equipment
EGRS Output option for EG (RS232, Mitutoyo, Analog), at time of order $150.00
EGRS Output option for EG (RS232, Mitutoyo, Analog), as a retrofit, at factory $200.00
15-1004 MESURgauge Software $395.00
09-1048A Serial cable, gauge to PC (requires EGRS) $75.00
09-1047 Cable, gauge to Mitutoyo SPC (requires EGRS) $75.00
11-1042 Overload protection module, gauge to test stand (requires EGRS) $195.00

For 220V operation add suffix E to model number. Example: EG50E
 

Model ØA B C Thread
EG012-EG200 0.200 [5.8] 0.19 [4.8] 0.35 [8.9] #10-32
EG500 0.375 [9.5] 0.44 [11.2] 0.68 [17.3] 5/16-18



Products | Applications Gallery | Product Literature | How to Order | About Mark-10 | Contact Us
Frequent Questions | Distributors | Conversion Calculator | Join Mailing List | Home