90° PEEL FIXTURE
 |
<< The G1045 is shown in a typical 90° peel
test for a strip of adhesive tape. The fixture is mounted on an
ESM301
motorized test stand with optional limit switch,
Series BG digital
force gauge, and
G1008 film & paper grip. |
 Roll over image to magnify
|
This fixture is designed for applications in the packaging and food and
beverage industries. Typical applications include the testing of adhesives, films, and packaging, such as foil seals found on yogurt
containers, juice containers, and others.
A large flat working table with mounting holes accommodates a range of sample
sizes. As the test stand crosshead moves vertically, the table moves
horizontally, maintaining a 90° angle between the table and the direction of
pull. The table is connected to the crosshead via a cable.
A unique limit switch option is available for motorized test stands to
prevent cable breakage due to excessive movement.
 |
<< A typical 90° peel
test for a foil seal on a container. The G1045 fixture is mounted on a test stand with
digital force gauge,
G1023 closure
grip, and
G1008 film & paper grip. Model G1068 adapter is needed to mount the G1023 to the surface of the peel fixture.
|
|
| Limit switch
Prevents cable breakage due to
excessive movement. When the table reaches its limit of travel, test stand movement stops.
Compatible with Mark-10 motorized test stands.
|
- Maintains 90° angle between the table and the direction of pull
- Large working area with threaded mounting holes
- Rugged design
- Maximum peel force: 5 lb (25 N)
- Maximum table travel: 8.2 in (210 mm)
- Compatible with the following test stands:
ESM, ESM301, ES30.
Recommended for use with a motorized test stand. Includes mounting hardware for these stands.
|
G1045 |
90° peel fixture |
$1200.00 |
|
G1045-1 |
Limit switch option for G1045 |
$200.00 |
| G1068 |
Adapter, G1023 bottle grip to G1045 |
$80.00 |
|
 |
888-MARK-TEN
