MARK-10: The force gauge and torque gauge sourceMARK-10 force gauges, torque gauges, and testing systems
MARK-10: A leader in force measurement and torque measurement testing systemsIdentify a MARK-10 force gauge or torque gauge for your force measurement and torque measurement requirements
USA Flag888-MARK-TEN

FORCE / Torque Indicator COMPARISON CHART

The following table summarizes the technical characteristics of Mark-10 force / torque indicators.

 
Model 5i Model 3i
Accuracy (FS ±1 digit): ±0.1% ±0.2%
Senor password protection: Yes No
Sampling rate: 7,000 Hz 2,000 Hz
Resolution: 1/2,000 / 1/1,000, depending on sensor 1/1,000
Data outputs: USB, RS-232, Mitutoyo, Analog USB
Programmable auto output via USB/RS-232: Yes No
MESURTM Lite software included: Yes Yes
Communication with Series DC test stand controllers: Full communication, including PC control None
Communication with MESURTMgauge and MESURTM Lite: Full communication Send current (single) readings only, cannot request from software
Data memory: Yes, 1,000 readings, with output No
Data memory deletion: Any individual data point, or clear all N/A
Statistics calculations: Max, min, mean, std. dev., number of readings, with output N/A
Averaging mode: Yes No
External trigger mode: Yes No
Analog load bar graph shown on display: Yes Yes
Set points (for pass/fail indication): Yes, with high/low indicators, markers on analog load bar graph, and outputs Yes, with high/low indicators, markers on analog load bar graph, no outputs
Display: Graphic, backlit LCD, with backlight auto-off Graphic, backlit LCD, with backlight auto-off
Keypad password protection: Yes, for calibration and individual keys No
Peak readings always displayed: Yes Yes
Programmable audible tones (beeps): Yes Yes
Certificate of calibration: Yes, NIST-traceable with Yes, NIST-traceable
Configurable calibration (weight increments and no. of data points): Yes Yes
Overload outputs: Dedicated pins for tension and compression No
No. of units of measurement: 5 3
Reversible housing: Yes No
Dimensions: 2.5 x 5.9 x 1.3 in.
[64 x 150 x 33 mm]		 2.5 x 3.9 x 1.5 in.
[64 x 99 x 38 mm]
US Price: $895 $545

 

» Questions? Call Mark-10 toll-free at 888-MARK-TEN for application and product assistance.