Tension and Compression Force Sensors Series SSM
Force measurement sensor for tensile and compressive loads in a wide variety
of applications, available in capacities from 0.25 lb to 100 lb. Thread on two
sides can accept a variety of hooks and implements, making this sensor
particularly well suited for inline tests.
Upgrade to Plug & TestTM
It is possible to upgrade existing Series SSM sensors to Series R03 for compatibility with Models 5i and 3i indicators, performed at our factory. The BGI style connector is replaced with a Plug & TestTM connector. Pricing is indicated below.
Hooks not included
|
- Member of the BGI family of interchangeable sensors
- "Personality module" holds all calibration and configuration data
- Rugged aluminum housing
- Measures tensile and compressive forces
-
NIST-traceable certificate
of calibration included
- Accuracy: ± 0.15% of full scale ±1 digit + BGI
- Weight: 0.4 lbs (0.2 kg)
- Warranty: 3 years
|
 Roll over image to magnify
|
| SSM025 |
0.25 X 0.0001 lb, 100 x 0.05 gF, 1 x 0.0005 N |
$850.00 |
| SSM05 |
0.5 x 0.0002 lb, 250 x 0.1 gF, 2.5 x 0.001 N |
| SSM2 |
2 x 0.001 lb, 1 x 0.0005 kgF, 10 x 0.005 N |
$715.00 |
| SSM5 |
5 x 0.002 lb, 2.5 x 0.001 kgF, 25 x 0.01 N |
| SSM10 |
10 x 0.005 lb, 5 x 0.002 kgF, 50 x 0.02 N |
| SSM20 |
20 x 0.01 lb, 10 x 0.005 kgF, 100 x 0.05 N |
| SSM50 |
50 x 0.02 lb, 25 x 0.01 kgF, 250 x 0.1 N |
| SSM100 |
100 x 0.05 lb, 50 x 0.02 kgF, 500 x 0.2 N |
| AC1018 |
Mounting kit, SS/SSM to force test stands |
$100.00 |
| SVC014 |
Upgrade service, BGI style connector to Plug and TestTM connector, with NIST certificate of calibration with data. |
$295.00 |
|
888-MARK-TEN
