TORQUE SENSOR for TOOL CALIBRATion, SERIES STC
TO BE DISCONTINUED DECEMBER 31, 2012
REPLACED BY SERIES R52 |
Calibrate torque tools with this torque measurement sensor, or use it as a
component of a torque testing system. Tapped holes on every surface allow for
easy mounting to a work bench, or fixture within a testing system. Capacities available from 10 ozin to
100 lbin.
Upgrade to Plug & TestTM
It is possible to upgrade existing Series STC sensors to Series R52 for compatibility with Models 5i and 3i indicators, performed at our factory. The BGI style connector is replaced with a Plug & TestTM connector. Pricing is indicated below.
|
- Member of the BGI family of interchangeable sensors
- "Personality module" holds all calibration and configuration data
- Rugged aluminum housing
- Universal mounting
- May be used for torque tool calibration or as a component of a torque testing system
-
NIST-traceable certificate
of calibration included
- Accuracy: ± 0.35% of full scale ±1 digit + BGI
- Weight: 1.2 lbs (0.5 kg)
- Warranty: 3 years
|
Roll over image to magnify
|
| STC10Z |
10 x 0.01 ozin, 7 x 0.005 kgFmm, 7 x 0.005 Ncm |
300% of capacity |
$850.00 |
| STC20Z |
20 x 0.02 ozin, 14 x 0.01 kgFmm, 14 x 0.01 Ncm |
| STC50Z |
50 x 0.05 ozin, 36 x 0.05 kgFmm, 35 x 0.05 Ncm |
| STC12 |
12 x 0.01 lbin, 140 x 0.1 kgFmm, 135 x 0.1 Ncm |
150% of capacity |
$800.00 |
| STC50 |
50 x 0.05 lbin, 580 x 0.5 kgFmm, 570 x 0.5 Ncm |
| STC100 |
100 x 0.1 lbin, 1150 x 1 kgFmm, 1150 x 1 Ncm |
| AC1006 |
Mounting kit, STC, table top |
|
$50.00 |
| AC1014 |
3/8" Jacobs chuck for STC |
$150.00 |
| SVC014 |
Upgrade service BGI style connector to Plug and TestTM connector |
$295.00 |
IN [MM]
|