MARK-10: The force gauge and torque gauge sourceMARK-10 force gauges, torque gauges, and testing systems
MARK-10: A leader in force measurement and torque measurement testing systemsIdentify a MARK-10 force gauge or torque gauge for your force measurement and torque measurement requirements
USA Flag888-MARK-TEN

manual TEST STANDs MODELS ES10 & ES20

The ES10 and ES20 manual test stands are compact and economical solutions for compression and tensile testing of small samples. Choose between a lever (ES10) for quick-action testing or a hand wheel (ES20) for more precise testing with greater consistency in testing results. Optional dial and digital indicator kits display up to 1" (25 mm) of displacement. Use these stands with force gauges and grips to create complete and economical testing systems.

                    ES20                       ES10

Data Sheet
User's Guide
Stand Comparison Chart


    Roll over image to magnify

 

  • Small size
  • Compatible with all Mark-10 force gauges, accessories and grips
  • Mounting holes for bench mounting
  • Large base plate with 5 #10-32 UNF holes for fixture mounting
  • Competitor force gauge mounting kits available

  ES10 ES20
Maximum Force 100 lbF [500 N]
Maximum Travel 9" [229 mm]
Loading Method Lever (can be placed in 3 positions for ease of operation) Top-mounted hand wheel
Travel Rate 1.050" [26.7 mm] / lever rev. 0.083" [2.1 mm] / wheel rev.
Weight 10 lb [4.5 kg]

 

  • A wide range of force gauges and gripping fixtures
  • Base plate >>
    Contains 25 #10-32 thread holes for fixture mounting
  • Dial indicator kit << (top)
    Displays up to 1" of displacement with resolution of 0.001"
  • Digital indicator kit << (bottom)
    Displays up to 1" / 25 mm of displacement with resolution of 0.0005" / 0.01 mm. Includes zero button and in/mm selector button.
  • Brackets for indicator
    Brackets are provided only, without indicator, for cases where a customer-supplied indicator is preferred.
  • Competitor force gauge mounting kits available
  • Eye End Adapters >>
    Allow for quick grip installation and removal, and prevent grip rotation. Mount to common test frames, load cells, and force gauges.


 

Model Description US Price
ES10 Test stand, lever-operated, 100 lbF $495.00
ES20 Test stand, hand wheel operated, 100 lbF $595.00
ES001 Dial indicator kit, 1" travel, brackets included $140.00
ES002 Digital indicator kit, 1" / 25 mm travel, brackets included $325.00
ES001NI Set of brackets for indicator, indicator not included $110.00
14-1068 Base plate $75.00
G1039* Coupler, #10-32 $15.00
 

* When ordering an ES10 or ES20 test stand with a Series MG force gauge with 20 lbF (100 N) or lower capacity force gauge and most Mark-10 grips, the G1039 coupler or any length extension rod is required in order to provide adequate clearance between the load cell shaft and the grip. MG50 and higher capacity force gauges include a G1039 coupler. 

 

ES10


ES20