The ESM Motorized Force Measurement Test Stand is a versatile and precise testing solution for
most compression and tensile testing applications up to 200 lbF. It can accept a
wide variety of sample shapes and sizes and can be configured in many positions
due to modular design.
Speed is adjustable in up and down directions
and a remote control unit provides added safety during testing. Other
features include a manual fine adjustment knob and a stepper motor that prevents
speed variation with load, making testing precise and repeatable. Use this
test stand with any Mark-10 force gauge and grips to create a complete testing
Maximum force: 200 lbF [1kN]
Maximum travel: 13" [330 mm]
Speed range: 0.5-13 in/min [13-330 mm/min]
Speed accuracy: ±5% of setting, ±0% variation with load
Remote control console with a 3' [1 M] cable
Universal power supply: 80-250 VAC
Manual travel knob
Mounting holes for bench mounting
Removable base plate with 25 #10-32 threaded holes for fixture mounting
Digital travel displays >>
6" [150 mm] and 12" [300 mm] travel models available, 0.0005"
[0.01 mm] resolution, 0.001" [0.03 mm] accuracy, SPC output for automated data collection.For output of travel data to a PC, the following items are required: 09-1066
cable and MRS100A communication adapter. Note: continuous data output rate is limited to 2 Hz.
Limit switch kit << Set of upper and lower adjustable solid state
limit switches. Repeatable to within 0.001" [0.03 mm].
<< Eye End Adapters Allow for quick grip installation and removal, and prevent grip rotation. Mount to common test frames, load cells, and force gauges
Set point / overload protection cable
Stops test stand travel at programmable high and
low set points for tension and compression forces. Also protects the force gauge against
accidental overloads during motorized tests. Compatible with Series 5 and Series 4 force gauges. Can be used simultaneously with the USB data output cable supplied with the gauge.
Column extensions >> A spacer
is supplied between the base and the column, increasing clearance between the
force gauge and base (does not increase travel distance). Available in 6", 12", and 24",
and custom lengths.
Custom speed ranges Speeds can be modified to as slow as 0.02
in/min [0.5 mm/min] or as fast as 45 in/min [1143 mm/min]. Note that in some
cases, the maximum force will be affected. Contact Mark-10 for complete details.