MARK-10: The force gauge and torque gauge sourceMARK-10 force gauges, torque gauges, and testing systems
MARK-10: A leader in force measurement and torque measurement testing systemsIdentify a MARK-10 force gauge or torque gauge for your force measurement and torque measurement requirements
USA Flag888-MARK-TEN

MOTORIZED TEST STAND MODEL ESMH

New upgraded capacity of 100 lbF (500 N)!

The ESMH is a 100 lbF (500 N) capacity horizontal test stand designed for tension, compression, and friction testing. A smooth top surface makes this tester particularly well suited for coefficient of friction testing. Other typical applications include the testing of sealed pouches, fabrics, tubing, sutures, and many other items in virtually every industry.

The tester features integrated limit switches for repetitive testing or other tests where travel limits are required. Modular design accommodates a wide variety of test sample shapes and sizes. The ESMH uses a remote control unit, distancing the operator from the test for added safety and convenience. Use this test stand with a Mark-10 force gauge and grips to create a complete testing solution.

Data Sheet
User's Guide
Stand Comparison Chart


    Roll over image to magnify

  • Maximum force: 100 lbF [500 N]
  • Maximum travel: 13" [330 mm], 12" [305 mm] w/optional travel display
  • Speed range: 0.2 - 50 in/min [5 - 1270 mm/min]
  • Speed accuracy: ±5% of setting, ±0% variation with load
  • Limit switch repeatability: ±0.001" [0.03 mm]
  • Remote control console with a 3' [1 M] cable
  • Universal power supply: 80-250 VAC
  • Mounting holes for bench mounting
  • Removable loading plate with matrix of #10-32 threaded holes
  • CE mark
 
  • A wide range of force gauges and gripping fixtures
  • Digital travel display <<
    12" [300 mm] travel, 0.0005" [0.01 mm] resolution, SPC output for automated data collection
  • Set point / overload protection cable
    Stops test stand travel at programmable high and low set points for tension and compression forces. Also protects the force gauge against accidental overloads during motorized tests. Compatible with Series 5 and Series 4 force gauges. Can be used simultaneously with the USB data output cable supplied with the gauge.

Mark-10 force gauges with data output include a USB cable, which can be connected directly to a PC.

If the ESMH001 digital travel display option is ordered and connection to a PC is desired, the following connection cables are required:

Travel display (Mitutoyo) <=> 09-1066 cable, Mitutoyo <=> MRS100A converter, Mitutoyo to RS-232 <=> RSU100 converter, RS-232 to USB (optional)

Ordering information for these accessories can be found here.

Model Description US Price
ESMH Test stand, motorized, 100 lb, horizontal, 110 V $2,850.00
ESMH001 Digital travel display, 12" x 0.0005 (300 mm x 0.01) $900.00
09-1180 Cable, set point / overload protection, Series 5/4 to stand $185.00

The ESMH contains a universal power supply (80 - 240V) and includes a power cord with US plug. Add suffix ‘E’ for Euro plug, ‘U’ for UK plug, or 'A' for Australian plug.

Ex: ESMHE, ESMHU, ESMHA

The ESMH is supplied with a small hook, medium hook, 2" diameter compression plate, extension rod, and #10-32 coupler.


IN [MM]