TEST STAND COMPARISON CHART

The following table summarizes the technical characteristics of Mark-10 torque gauges in an easy-to-read comparison format. Click here to download a PDF version.

Other comparison charts are available:

» Force Gauges Comparison Chart

» Torque Gauges Comparison Chart

Force Test Stands

Force Capacity lb [N] Max. Travel1 in [mm] Loading Method Travel Rate in [mm] Daylight2 in [mm] Included Accessories4 ESM 200 [1000] 13 [330] Motorized 0.5-13 [13-300] / min 14 [356]3 Tool kit, ext. rod, sm. hook, med. hook, #10-32 coupler, 2" compression plate ESMH 50 [250] 12 [305] Motorized 0.2-50 [5-1270] / min 13 [330] (12 [305] w/optional travel display) TSFM500 / TSFM500H 500 [2200] 4 [102] Motorized 0.2 - 5.5 [5 - 140] / min TSF/ TSFM500: 14 [356]3   TSFH/ TSFM500H: 16.5 [419]3 Tool kit, sm. hook, med. hook, lg. hook, extra lg. hook, 1/2-20F adapter plate, 2" and 3" compression plates, couplers (#10-32 and 5/16-18) TSF / TSFH 1000 [5000] Side-mounted hand wheel 0.013 [0.34] / wheel rev. ES10 / ES20 100 [500] 9 [229] Lever 1.05 [26.7] / lever rev. 9 [229] --- Top-mounted hand wheel 0.06 [1.5] / wheel rev. ES05 30  [150] 1.5 [38] Spring-loaded lever --- 8 [203]3 --- ES30 200 [1000] 13 [330] Side-mounted hand wheel 0.05 [1.3] / wheel rev. 14 [356]3 Tool kit, ext. rod, sm. hook, med. hook, #10-32 coupler, 2" compression plate TSA / TSAH 750 [3750] w/stops: 2.75 [70] w/o stops: 6 [152] Rack & pinion, lever can be positioned in 30° increments 3.00 [76.2] / lever rev. TSA: 10.5 [267]3 TSAH: 14.5 [368]3 Tool kit, med. hook, lg. hook, 2" compression plate TSB 100 [500] w/stops: 2.75 [70] w/o stops: 6 [152] Rack & pinion, lever can be positioned in 30° increments 3.00 [76.2] / lever rev. 13 [330] --- TSC / TSCH 1000 [5000] 3.5 [89] Inline hand wheel 0.10 [2.5] / wheel rev. TSC: 10 [254]3 TSCH: 13 [330]3 Tool kit, med. hook, lg. hook, extra lg. hook, 1/2-20F adapter plate, 2" compression plate

Torque Test Stands

All torque test stands include a tool kit.

1. Maximum travel depends on the grips or fixtures used during testing. The dimensions indicate distances without the use of grips or fixtures.

2. The clearance between the bottom of a mounted force gauge or sensor and the loading surface of the stand. This distance will be less if grips or fixtures are used. The numbers in this chart are approximate. If your test sample size is very close to the daylight figure above (or daylight less grip(s) or fixture(s)), a column extension may be necessary.

3. Longer columns available.

4. All force test stands include force gauge mounting screws.

5. All torque test stands include an adapter to secure the STJ torque sensor during testing. Adapters are also available for other torque sensors.

6. The slider is intended for engaging and disengaging samples. The torque sensor adapter is mounted to the slider.