888-MARK-TEN
 

help desk software


 
Test Stand Comparison Charts

The following tables summarize the technical characteristics of Mark-10 test stands.

 

Motorized Force Test Stands Manual Force Test Stands
Torque Test Stands  
 
 

Motorized Force Test Stands
 
Model Force Capacity
Maximum Travel1
Speed Range
Daylight2
ESM303 / ESM303H 300 lbF
[1.5 kN]
18.0
[457 mm]
0.02 - 45 in/min
[0.5 - 1,100 mm/min]

ESM303:
18.7 in [475 mm]3


ESM303H:
21.2 in [538 mm]3

ESM750S 750 lbF
[3.4 kN]
14.2 in
[360 mm]
0.001 - 60 in/min
[0.02 - 1,525 mm/min]
19.5 in
[494 mm]

ESM1500S 1,500 lbF
[6.7 kN]
14.2 in
[360 mm]
0.001 - 90 in/min
[0.02 - 2,300 mm/min]
19.5 in
[494 mm]

ESM1500
1,500 lbF
[6.7 kN]
32.0 in
[813 mm]
0.001 - 90 in/min
[0.02 - 2,300 mm/min]
40.1 in
[1019 mm]

 

Manual Force Test Stands
           
Model Force Capacity
Maximum Travel1
Loading Method Travel Rate
Daylight2
ES10 / ES20 100 lbF
[500 N]
9.0 in
[229 mm]

ES10: Lever

ES20: Top-mounted
hand wheel

ES10:
1.05 in [26.7 mm] /
lever rev.

ES20:
0.06 in [1.5 mm] /
wheel rev.

9.0 in
[229 mm]
ES05 30 lbF
[150 N]
1.5 in
[38 mm]
Spring-loaded lever --- 8.0 in
[203 mm]
ES30 200 lbF
[1,000 N]
13.0 in
[330 mm]
Side-mounted hand wheel 0.05 in [1.3 mm] /
wheel rev.
14.0 in
[356 mm]3
TSA750 / TSA750H 750 lbF
[3,750 N]

with travel stops:
2.75 in [70 mm]

without travel stops:
6.00 in [152 mm]

Lever with rack & pinion, lever can be positioned in 30° increments 3.00 in [76.2 mm] /
lever rev.

TSA750:
10.5 in [267 mm]3


TSA750H:
14.5 in [368 mm]3

TSB100 100 lbF
[500 N]

with travel stops:
2.75 in [70 mm]

without travel stops:
6.00 in [152 mm]

Lever with rack & pinion, lever can be positioned in 30° increments 3.00 in [76.2 mm] /
lever rev.
13.0 in
[330 mm]3
TSC1000 / TSC1000H 1,000 lbF
[5,000 N]
3.5 in
[89 mm]
Inline hand wheel 0.10 in [2.5 mm] /
wheel rev.

TSC1000:
10 in [254 mm]3


TSC1000H:
13 in [330 mm]3

TSF / TSFH 1,000 lbF
[5,000 N]
4.0 in
[102 mm]
Side-mounted hand wheel 0.013 in [0.34 mm] /
wheel rev.

TSF:
14.0 in [356 mm]3

TSFH:
16.5 in [419 mm]3

           

Torque Test Stands
           
Model Torque Capacity
lbFin [Nm]
Speed Range Angle Indication Programmable Angle Travel Limits Daylight2 (w/R50 torque sensor)
in [mm]
TST / TSTH 100
[11.3]

12° / wheel rev.

(manually operated)

Dial, optional digital angle display (no data output) N/A

TST:
15 [381]3

TSTH:
16 [406]3

TSTM-DC/ TSTMH-DC 100
[11.3]
0.01-15 RPM
[0.05-90°/s]
Dial, integrated digital angle display with RS-232 output Yes

TSTM-DC:
13 [330]3

TSTMH-DC:
16 [406]3

   
1. Maximum travel depends on the grips or fixtures used during testing. The dimensions indicate distances without the use of grips or fixtures.
2. The clearance between the bottom of a mounted force gauge or sensor and the loading surface of the stand. This distance is reduced if grips or fixtures are used. Column extensions are available with certain test stand models.
3. Column extensions available.
   
» Questions? Call Mark-10 toll-free at 888-MARK-TEN for application and product assistance.
 

Force Gauges  |  Torque Gauges  |  Sensors & Indicators  |  Test Stands  |  Systems & Kits  |  Grips & Attachments  |  Accessories  |  Software
Applications Gallery  |  Product Literature  |  
About Mark-10  |  Contact Us  |  Terms of Use