motorized torque TEST STAND MODEL TSTM / TSTMH

The TSTM Motorized Torque Measurement Test Stand is ideal for a wide variety of torque testing applications up to 100 lbin, including closure torque testing, fastener torque testing, and more. Motorized clockwise and counterclockwise rotation allows for highly precise and repeatable tests. Versatile modular design allows the stand to be configured for a variety of torque sensors and gripping fixtures while a lever-operated slider with travel stops makes engaging and disengaging samples quick and efficient. The stand includes a torque loading plate with tapped holes for grip and custom fixture mounting and a resetable angle indicator.

Available in vertical and horizontal orientations.

Data Sheet

User's Guide

Stand Comparison Chart

• Maximum load: 100 lbin (11.3 Nm)
• Speed range: 0.3-8.6 RPM (4-52°/s)
• Speed accuracy: ±5% of setting
• No speed variation with load
• Maximum angular travel: no limit
• Throat: 4.10" (104 mm)
• Manual adjustment: 12°/knob rev
• Angle dial with 2° resolution (optional digital angle indicator has 0.1° resolution, see below)
• Maximum slider travel: 15.5" (394 mm)
• Slider travel rate: 1.047" (26.6 mm) / lever rev
• Line voltage: 80-240 VAC 50/60 Hz
• CE mark

Roll over image to magnify

• Series R50 universal torque sensors
  Mount directly to the test stand. A wide range of capacities is available.
• 5i or 3i force/torque indicator
  The indicator displays the torque readout of the R50 sensor. More basic Series TT03 torque gauges can also be used.
• Digital angle indicator >>
  Displays cw or ccw angle in 0.1° resolution for approximately 278 rotations, resettable with "zero" button. Accurate to ±0.7°. Includes backlight. Three sets of mounting holes allow the indicator to be mounted perpendicular to, or parallel to the test stand column. It can also be repositioned along the column. Rugged aluminum housing.
• Grips and attachments
  A variety of grips and attachments are available.
• Axial compensator >>
  Allows for axial movement in threaded fasteners, bottle caps, and similar torque testing applications.
• Overload protection module
  Protects against accidental overloads during motorized tests. Adjustable from 20 - 110% of the sensor's capacity.
• Set point cable
  Stops test stand rotation at programmable high and low set points for clockwise and counterclockwise torque. Requires the 5i.
• Column extension
  Column can be extended to custom lengths (see Ordering Information)